CHPGW - ACRYLIC LATEX WHITE, 130409
- MSDS: CHPGW
- Manufacturer: BENNETTE PAINT MFG CO INC
- Product Name: ACRYLIC LATEX WHITE, 130409
- National Stock Number: 8010-00N088602
Product Identification
Product ID:ACRYLIC LATEX WHITE, 130409
MSDS Date:05/22/1989
FSC:8010
NIIN:00N088602
MSDS Number: CHPGW
Responsible Party
HAMPTON, VA 23661
US
Emergency Phone: 757-838-7777
Info Phone: 757-838-7777
Cage: 3Y107
Contractor
Telephone: 804-838-7777
Cage: 3Y107
Ingredients
0.1 @ 68F.
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: <5%
OSHA PEL N/K
ACGIH TLV: 50 PPM, VAPOR, C
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE)
CAS: 64742-52-5
RTECS: PY8035001
OSHA PEL N/K
ACGIH TLV: 5 MG/M3 (MFR)
0.51 LBS/GAL (61 G/L).
RTECS: 9999999VO
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHALATION:AMMONIA, FORMALDEHYDE
AND RESIDUAL MONOMER VAPORS MAY BE IRRITATING TO EYES, SKIN, MUCOUS
MEMBRANES, RESPIRATORY TRACT AND MAY PRODUCE SYMPTOMS OF HEADACHE,
NAUSEA IN POORLY VENTILATE D AREAS. SKIN CONTACT:PROLONGED OR
REPEATED CONTACT WITH PAINT MAY CAUSE IRRITATION. EYE
CONTACT:DIRECT(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:CONTACT WITH PAINT MAY RESULT IN
IRRITATION. INGESTION:DO NOT INGEST.
Medical Cond Aggravated by Exposure:ALLERGY OR SKIN SENSITIZATION.
First Aid
First Aid:INHAL:MOVE SUBJECT TO FRESH AIR. EYES:IMMEDIATELY FLUSH
W/PLENTY OF WATER FOR AT LEAST 15 MINUTES & CONSULT MD. SKIN:WASH
THOROUGHLY W/SOAP. INGEST:GIVE TWO GLASSES OF WATER TO DRINK & CALL
MD.
Fire Fighting
Flash Point Method:TCC
Flash Point:200F,93C
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP .
WATER MAY BE USED TO COOL CLOSED CNTNRS TO PREVENT PRESSURE
BUILD-UP & POSS EXPLO WHEN EXPOS TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:RECOVER LIQUID W/ABSORBENT MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN.
Other Precautions:AVOID PROLONGED CONTACT WITH SKIN.
Exposure Controls
Respiratory Protection:IN CONFINED AREAS & WHEN SPRAYING, USE NIOSH
APPROVED RESPIRATORY DEVICE.
Ventilation:PROPER VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA . NONE NEEDED UNLESS SPECIAL EQUIPMENT
DESIRED.
Work Hygienic Practices:WASH HANDS AFTER USE, BEFORE EATING OR USING
WASHROOM.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:SEE ING 1
Vapor Density:HVR/AIR
Spec Gravity:1.2 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:SOLUBLE
Appearance and Odor:VISCOUS LIQUID; MILD ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXTREME TEMPERATURES IN CLOSED CONTAINERS.
Hazardous Decomposition Products:NONE.
Disposal
Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.